Rotax Filter
KTM Filter Set
Yamaha Filter
Rotax DS650
Genuine K&P Stainless Steel
Micronic Oil Filters
We have them all just tell us which bike.
2147-2157 Internal stainless oil
filters $64.95ea.
S1, S2, S9 Spin on type oil filters
$134.95ea.
S4, S5, Spin on type oil
filters $144.95ea.
S7, S8 Internal $94.95ea.
S3, 2158 Internal oil filters $79.00ea.
2149, 2155 KTM set $129.90 set
All spin-on types come with outer cup, soft
strap wrench and plug
(We have all street bike filters also.)
To order:
email: americandirt@earthlink.net
call: 1-951-283-5447
Visa, MasterCard, Discover, Amex, COD, PayPal
Spin-On
Cannondale
Honda CRF
Husaberg
Click Below For The Different Applications
Click "Back" on your browser to return to
American Dirt Bike.
Dirt
Bike Application Chart
Road
Bike Application Chart
ATV &
Side by Side Chart
K & P Stainless Steel Micronic Oil Filters
If you really care about the life of your engine.
BEWARE OF CHEAP COPY FILTERS!
Everything you wanted to know about K&P Stainless Filters
These stainless oil filters are made from laser cut,
medical grade, stainless steel micronic filter cloth to provide unmatched protection
against oil contamination and resultant engine damage.
Superior Filtration
This filter is far superior to any paper filter you can buy. It filters to 35
micronic absolute. This means that no particle larger than 35 microns will pass through
this filter. Paper filters are rated at 50 to 80 microns avarage, meaning a paper filter
will pass particles many times larger.
Cleanable & Reusable
The stainless steel micronic oil filter should last the life of your machine.
Simply remove rince in clean solvent and reinstall. Monitor wear of internal engine
components by inspecting the particles trapped by the filter. Avoid catastrophic failures
by decting problems early.
Consistent Flow Under All Conditions
These stainless steel filters perform equally well from cold start up through
extreme heat without loss of protection. A one inch square of our stainless steel micronic
filter materal will flow 1.9 gallons of 90 weight oil per miniute at only 1 PSI pump
pressure ( 70 degrees F.) (typical filter size is 14 sq. inch) Standard paper filters do
not flow well when the oil is cold, often causing the bypass valve to open allowing
unfiltered oil to enter the engine.
Unaffected By Water, Heat & Pressure
This stainless steel oil filter is capable of withstanding extremely high
pressure and flow rates. the stainless steel cloth is also unaffected by water, unlike
standard paper filter material, which swells in the presence of water closing filter pores
and reducing flow.
Proven Technology
This high-tech filter technology is widly used in all types of auto racing and in
the aerospace industry.
What Are Microns
A micron is one thousandth of a millimeter, thats about .00003937 inches. 35
microns is about .00138 inches (just over one thousandth of an inch) this filter will not
passany particle larger than 35 microns, the avarage human hair is 140 microns thick.
Cleaning Instructions
USE CARE WHEN HANDLING THE FILTER
Do not bend the stainless steel pleats, as this could weaken the filter.
1. Filter should be cleaned with every oil change.
2. The stainless steel filter screen can be cleaned with solvent, kerosene, aerosol,
carburetor cleaner or any other degreasing agent, even common dish soap.
3. If inspection of trapped debris is desired, flush the particles into a clean container.
4. Lightly blow air through the filter from the inside out to remove any small particles
or cleaning agent from the screen.
5. Note original filter position to insure correct replacement filter installation.
6. Save the rubber grommet from your old filter some may be reused with the stainless
filter if the one provided ever becomes damaged.
Filters are manufactured with 6061-T6 billit aluminum end caps.
If you dont see it we can build it.
